Tuesday, December 29, 2020

From the Bottom of my Heart

 

Hi, everyone!  I'm loving the CAS (clean and simple) Sketch Challenge this week over at Splitcoast!  A perfect way to share a sneak peek of some new goodies from Divinity Designs LLC (available January 1st).  The four designer paper patterns are all from the 'Happy Hearts' Paper Pad; the sentiment is from 'Thank You' clear stamps, cut out with the largest of the Sentiment Strips 2 Dies.  The large Thank You was cut out with the 'Thank You' Dies and the tiny hearts are from the 'Heart Clay Sprinkles'.....part of the Shaker Supplies line.  The paper strips were adhered together and cut out with the largest of the Pierced Rectangles Dies.  Paper Piercing and 'Faux Stitching' was used since I am NOT good at sewing on paper....eek, what a nightmare! lol!!  The panel was framed with the Matting Rectangle Die and the pink card base was cut out with the A2 Portrait Card Base with Layer Dies.


Thanks so much for stopping by!

Blessings,

Designer for Divinity Designs LLC, Angie Crockett

New Year Mandala

Hi, everyone!  This week's Featured Stamper over at Splitcoast is Ina aka yellowrose46...congrats, Ina!!!  I chose this beautiful Iris Fold card with the irridescent stars as inspiration for my card today.  I didn't have any irridescent  paper, so I used blue and silver mirror paper. The background paper is from the Shine Bright Paper Pad and here are the dies used for this card from Divinity Designs LLC: Mandala Layering Combo, Snow Crystals, Christmas Dove, Matting Rectangle, Rectangles, A2 Portrait Card Base with Layer, and Holiday Words


Thanks for visiting with me!

Blessings,

Designer for Divinity Designs LLC, Angie Crockett

Tuesday, December 22, 2020

Snowbirds

 

Hi, everyone!  For my card today, I have combined Splitcoast's Color Challenge (Sea Foam, Pear, Peacock) with the Sketch Challenge.  The cute birdies and sentiment are from the Snowbirds Stamp/Die Duos set by Divinity Designs LLC.  The snowflake panel and mat are from the Snowflake Sky Dies set; the foliage is from the 'Pinecones and Pine Branches' Dies set. Other dies used are the Sentiment Strips with Layers Dies, Matting Rectangle, and A2 Portrait Card Base with Layer Dies.  Though the camera does not show it, the snowflake background and sentiment panel are white shimmer paper....looks really pretty in the real.


Thanks for stopping by!!

Blessings,

Designer for Divinity Designs LLC, Angie Crockett

Tuesday, December 15, 2020

Dunnuh...Dunnuh...Dunnuh....Shark!!

 

Hi, everyone!  This week's Sketch Challenge over at Splitcoast gives us all a chance to show how creative our imagination can be!  At first glance, I flipped the sketch upward and thought of a space ship.....THEN I showed it to my hubby and he said, "Well, it's a shark!" I laughed out loud and told him he was a genius and that I was going to do it.....not sure how, but I was gonna make it happen!!  So, using various dies and stamps, masking and sponging, the scene slowly came to life!  Here is a list of items used to create this silly scene:

Stamps: the tiny cake is from 'Recipe Card Icons' from Divinity Designs; the 'Palm Trees' are from DMD; the sentiment is from 'Twice the Wishes' by My Favorite Things.  Dies: from Divinity Designs LLC, Pierced Rectangles, Circles, Matting Rectangle, A2 Portrait Card Base with Layer; the nostrils are actually commas cut from the Alphabet Caps Dies.  

The teeth were fussy cut after cutting a circle within another circle, then cutting the teeth from the inside opening with scissors.  The waves on the sentiment panel were cut with scalloped scissors.


Thanks so much for looking!

Blessings,

Designer for Divinity Designs LLC, Angie Crockett

Tuesday, December 8, 2020

"I Love Mew" Double Dutch Fold

 

Hi, everyone!  This week's Sketch Challenge over at Splitcoast was designed around the fun fold known as the Double Dutch Fold.  I have never tried one of these before...it took a little while longer to decorate the extra panels but I love how it turned out!  This is a birthday card for my little niece who just turned one.  The stamps on the front are from the 'Purr-fect' set by My Favorite Things, the sentiments on the inside are from 'Cocktail Mixer' by Newton's Nook.  All of the dies shown are from Divinity Designs LLC: Grass Lawn, Clouds and Raindrops, Double Stitched Squares, Squares, and Double Stitched Rectangles. The small images were colored with markers and the kitty was sponged with wisteria and gray inks using reverse masking. (Before sponging the kitty, her nose and ears were colored with a pink marker, then coated with a clear glaze pen.)  The clouds in the background were sponged over a template created with the same cloud die set.

This is a view of the inside, with the flaps open.
Thanks for visiting with me!

Blessings,

Designer for Divinity Designs LLC, Angie Crockett

Tuesday, December 1, 2020

Birthday Cocktail

 

Hi, everyone!  This week' Sketch Challenge over at Splitcoast was absolutely perfect for creating a birthday card for my hubby.  His card request this year was for me to make a 'Bahama Mama' card (his fave tropical drink when we go on vacation!)  I had been searching for a fun stamp set to buy and found this 'Cocktail Mixer' set by Newton's Nook.  The image was stamped with Stazon Jet Black; everything except for the liquid was colored with markers, then sealed with a clear glaze pen; after the glaze was dry, I used sponges and inks to color in the cocktail.  The background panel was sponged with the same colors: Marigold Morning, Tangerine Tango, and Real Red.  The palm tree dies are from Top Dog Dies, who went out of business several years ago.  The water and clouds were also colored with sponges.  The small strip of designer paper is from the 'Weathered Wood' Paper Collection by Divinity Designs LLC.  Here are the additional items from Divinity Designs LLC: Pierced Rectangles Dies, Matting Rectangle Die, Pierced Circles Dies, Circles Dies, A2 Portrait Card Base with Layer Dies.

Thanks for stopping by!!

Blessings,

Designer for Divinity Designs LLC, Angie Crockett

Divinity Designs LLC December New Release

Hi, everyone!  Welcome to the December new release party for Divinity Designs LLC!  Check out the entire release plus some amazing designer samples HERE!  

Here are the new items featured in my three samples for today.....please click the links in the descriptions for the previously released items:


My first card features the new 'Snowbirds' Stamp/Die Duos set (LOVE THESE BIRDIES!)  I was super excited that the birds were the right size to fit in the pockets from the Fishing and Hunting Vest Dies set!  The card base (and shirt) were cut with the Couture Collection Dies.  The buffalo plaid paper is from the 'Menswear Material' Collection.  The sentiment was framed and matted with the Rectangles Dies and Double Stitched Rectangles Dies set. A clear glaze pen was used to coat the zipper, snaps, and the birdies' eyes.

My second sample is a slimline design which features the adorable 'Beary Christmas' Stamp/Die Duos set and the new Slimline Cubes Background Die.  I began by using the Slimline Layering Rectangles Dies to cut a panel out of the Serenity Snowflakes Slimline Paper Pad.  The cube background was cut twice, once with the plum cardstock and again with shimmery white cardstock, so that I could insert shimmery snowflake shapes within the cube pattern before popping up the frame with foam tape over the snowflake designer paper.  The Slimline Curvy Slopes Dies and Slimline Rectangles Dies were used with the shimmery white cardstock to cut out the snowy hillside.  An Oval Die was used to cut the skating pond and the Sentiment Strips Dies were used for the sentiment panels. The scene was matted with the Slimline Scalloped Rectangles Dies; the card base was cut with the Slimline Card Base Die.
My third sample features the new Mandala Layering Combo Dies, along with the following items: Stoneware Paper Pad, Circles Mixed Media Stencil (dry embossed), Pierced Circles Dies, Pierced Rectangles Dies, Deco Border Die, Inspiration Words Dies, Matting Rectangle, and A2 Portrait Card Base with Layer Dies.  For the center of the mandala, I used the smallest Circle Die (with the Stoneware paper) and the smallest Pierced Circle Die to create a decorative piece.  The top mandala layer was cut from black mirror paper which gives it a nice finished look.

Thanks for stopping by!

Blessings,

Designer for Divinity Designs LLC, Angie Crockett